Features of afterpurification of galvanic manufacture waste waters from diesel fuel by modern active carbons

Authors

  • Alexey V. Nistratov assistant of MUCTR, Moscow, alvinist@yandex.ru
  • Vitaly N. Klushin professor, doctor of technical sciences, professor of MUCTR, Moscow
  • Viktor M. Mukhin professor, doctor of technical sciences, head of laboratory of JSC «ENPO «Neorganika», Elektrostal
  • Artem V. Kolesnikov candidate of technical sciences, science researcher of MUCTR, Moscow
  • Yulia V. Bekkereva student of MUCTR, Moscow

Keywords:

purification, waste water, diesel fuel, active carbons.

Abstract

The article presents the results of comparative tests of modern powdered active carbons in the
process of purification of waste water from diesel fuel in presence of Fe(III), Cu(II), Ni(II), Zn(II)
hydroxides. The influence of wastewater composition, active carbon type and dose on the efficiency of
pollution removal is explored. Active carbon OU-B is recommended as an adsorbent, providing 80-100 %
degree of purification from diesel fuel for most of the wastewater compositions at the dose 1 g/l and mixing
time 30 minutes.

Downloads

Download data is not yet available.

References

Downloads

Published

2019-11-18

Issue

Vol. 14 No. 1 (2014): Sorbtsionnye i Khromatograficheskie Protsessy

Section

Статьи

How to Cite

Features of afterpurification of galvanic manufacture waste waters from diesel fuel by modern active carbons. (2019). Sorbtsionnye I Khromatograficheskie Protsessy, 14(1). https://journals.vsu.ru/sorpchrom/article/view/1441

Most read articles by the same author(s)