Extraction of microplastics from aquatic environments using reversed-phase modified magnetic carbons

Authors

  • Alexander S. Gubin Voronezh State University of Engineering Technologies, Voronezh
  • Pavel T. Sukhanov Voronezh State University of Engineering Technologies, Voronezh
  • Alexey A. Kushnir Voronezh State University of Engineering Technologies, Voronezh
  • Igor E. Reshetov Voronezh State University of Engineering Technologies, Voronezh
  • Yaroslav D. Borisov Voronezh State University of Engineering Technologies, Voronezh

DOI:

https://doi.org/10.17308/sorpchrom.2025.25/13574

Keywords:

microplastics, magnetic carbons, extraction, sorption, river water

Abstract

 

Abstract. A method for extracting microplastics of various natures (high and low density polyethylene, polyvinyl chloride, polystyrene, polyethylene terephthalate, polycarbonate, ABS plastic, polyurethane and polyamide fibers) from aquatic media is proposed. Unmodified magnetic carbon from rice husk (Fe3O4@C) and magnetic carbons modified with reversed phases C8 (Fe3O4@C-C8) and C18 (Fe3O4@C-C18) were used as sorbents.

When using Fe3O4@C, 80.5 to 95.5% of microplastics are extracted, and the sorption capacity is 128-200 mg/g. After modification of Fe3O4@C with reversed-phase C8, the sorption efficiency increases significantly. During Fe3O4@C-C8 sorption, 94.4-99.7% of microplastics are extracted from aqueous solutions, and the sorption capacity is 184-246 mg/g. Further hydrophobization of the Fe3O4@C sorbent with reversed-phase C18 leads to an increase in the degree of extraction of polystyrene, polyvinyl chloride, and polyethylene up to 99.8-99.9% and an increase in sorption capacity (260-306 mg/g). The extraction efficiency of polycarbonate, polyurethane, polyamide, and polyethylene terephthalate decreases to 91.2-95.2%. The sorption isotherms of microplastics during extraction in the studied sorption systems are most adequately described by the Langmuir equation.

For the desorption of microplastics, a thermal method (calcination of the sorbent at 700 ºC) and centrifugation at 4000 rpm have been proposed. Regardless of the nature of the microplastic, both methods allow for the almost complete desorption of microparticles. The number of sorption-desorption cycles during centrifugation significantly depends on the degree of water pollution. In the studied systems, the degree of extraction of microplastics from river water is reduced by 5-7% compared to sorption from distilled water, which is due to the competitive sorption of impurities.

Downloads

Download data is not yet available.

Author Biographies

  • Alexander S. Gubin, Voronezh State University of Engineering Technologies, Voronezh

    Ph.D., Associate Professor of the Department of Industrial Ecology and Technosphere Safety, Voronezh State University of Engineering Technologies, Voronezh, Russian Federation

  • Pavel T. Sukhanov, Voronezh State University of Engineering Technologies, Voronezh

    professor, doctor of science (chemistry), Department of Physical and Analytical Chemistry, Voronezh State University of Engineering Technologies, Voronezh, Russian Federation, pavel.suhanov@mail.ru

  • Alexey A. Kushnir, Voronezh State University of Engineering Technologies, Voronezh

    Ph.D., Associate Professor of the Department of Industrial Ecology and Technosphere Safety, Voronezh State University of Engineering Technologies, Voronezh, Russian Federation

  • Igor E. Reshetov, Voronezh State University of Engineering Technologies, Voronezh

    student, the Department of Industrial Ecology and Technosphere Safety, Voronezh State University of Engineering Technologies, Voronezh, Russian Federation

  • Yaroslav D. Borisov, Voronezh State University of Engineering Technologies, Voronezh

    student, the Department of Industrial Ecology and Technosphere Safety, Voronezh State University of Engineering Technologies, Voronezh, Russian Federation

References

Nyadjro E.S., Webster J.A.B., Boyer T.P., Cebrian J., Collazo L., Kaltenberger G., Larsen K., Lau Y.H., Mickle P., Toft T., Wang Z. Data. 2023; 10(1): 726. https://doi.org/10.1038/s41597-023-02632-y

Kazak E.S., Filimonova E.A., Preobra-zhenskaya A.E. Moscow University Bulletin. Series 4. Geology. 2022; (6):110-123. (In Russ.) https://doi.org/10.33623/0579-9406-2022-6-110-123

Bahuguna A., Singh S. K., Bahugun, A., Sharma S., Dadarwal B.K. Journal of Research in Environmental and Earth Sciences.2021; 7: 29-36.

Sanchez-Nieva J., Perales J.A., Gonza-lez-Leal J.M., Rojo-Nieto E. Anal. Methods. 2017; 9: 6371-6378. https://doi.org/10.1039/C7AY01800B

Yuan F., Yue L., Zhao H., Wu H. Water Sci. Technol. 2020; 81(10): 2163-2175. https://doi.org/10.2166/WST.2020.269

Wang J., Sun C., Huang Q.X., Chi Y., Yan J.H. J. Hazard Mater. 2021; 419: 126486. https://doi.org/10.1016/j.jhazmat.2021.126486

Sun C., Wang Z., Chen L., Li F. Fabrica-tion of robust and compressive chitin and gra-phene oxide sponges for removal of microplas-tics with different functional groups. Chem. Eng. J. 2020; 393: 124796. https://doi.org/10.1016/j.cej.2020.124796.

Grbic J., Nguyen B., Guo E., You J.B., Sinton D., Rochman C.M. Environ. Sci. Tech-nol. Lett. 2019; 6(2): 68-72. https://doi.org/10.1021/acs.estlett.8b00671

Tang Y., Zhang S., Su Y., Wu D., Zhao Y., Xie BChem. Eng. J. 2021; 406: 126804. https://doi.org/10.1016/j.cej.2020.126804

Singh N., Khandelwal N., Ganie Z.A., Tiwari E., Darbha G.K. Chem. Eng. J. 2021; 418: 129405. https://doi.org/10.1016/j.cej.2021.129405

Wang J., Sun C., Huang Q.X., Chi Y., Yan J.H. J. Hazard. Mater. 2021; 419: 126486. https://doi.org/10.1016/j.jhazmat.2021.126486.

Li J, Chen X, Yu S, Cui M. Sci. Total. Environ. 2023; 875: 162647. https://doi.org/10.1016/j.scitotenv.2023.162647

Bhore R.K., Kamble S.B. J. Environ. Chem. Eng. 2022; 10(6): 108720. https://doi.org/10.1016/j.jece.2022.108720

Ermolin M.S., Ivaneev A.I., Savonina E.Y., Dzhenloda R. Kh. J. Anal. Chem. 2025; 80: 432-441. https://doi.org/10.1134/S1061934824701909

Ermolin M.S. Savonina E.Yu., Ka-tasonova O.N., Ivaneev A.I., Maryutina T.A., Fedotov P.S. Talanta. 2024; 278: 126504. https://doi.org/10.1016/j.talanta.2024.126504.

Bakhteeva I.A., Medvedeva I., Filinko-va M.S., Byzov I.V., Minin A.S., Zhakov S.V., Uimin M.A., Patrakov E.I., Novikov S., Sun-tsov A.Yu., Demin A.M. Int. J. Environ. Sci. Technol. 2023; 20(11): 11837-11850. https://doi.org/10.1007/s13762-023-04776-1

Sypko К.S., Gubin A.S., Sukhanov P.T., KushnirA.A., Pugacheva I.N. Analitika i kontrol’ [Analytics and Control]. 2024; 28 (1): 38-45. (In Russ.) https://doi.org/10.15826/analitika.2024.28.1.004

Gubin A.S., Sypko K.S., Kushnir A.A., Sukhanov P.T. J. Anal. Chem. 2025; 80(9): 1561-1574.

Sypko K.S., Gubin A.S., Kushnir A.A., Sukhanov P.T. Sorbtsionnye I Khromato-graficheskie Protsessy. 2023; 23(3): 395-404. (In Russ.) https://doi.org/10.17308/sorpchrom.2023.23/11319

Jena K.C., Scheu R., Roke S. An-gew.Chemie Int. Ed. 2012; 51:12938-12940. https://doi.org/10.1002/anie.201204662

Yan X., Delgado M., Aubry J., Gribelin O., Stocco A., Boisson-Da Cruz F., Bernard J., Ganachaud F. J. Phys. Chem. Lett. 2018; 9(1): 96-103. https://doi.org/10.1021/acs.jpclett.7b02993

Vácha R., Marsalek O., Willard A.P. J. Phys. Chem. Lett. 2012; 3(1):107-111. https://doi.org/10.1021/jz2014852

Uematsu Y., Bonthuis D.J., Netz R.R. Langmuir. 2020; 36: 3645-3658. https://doi.org/10.1021/acs.langmuir.9b03795

Sverguzova S.V., Shaikhiev I.G., Sapronova Z.A., Bomba I.V., Spesivtseva S.E. Sorbtsionnye I Khromatograficheskie Protsessy. 2024; 23(6): 1051-1059. (In Russ.) https://doi.org/10.17308/sorpchrom.2023.23/11866

Hu Q., Lan R., He L., Liu H., Pei X. J. Environ. Manage. 2023;329: 117104. https://doi.org/10.1016/j.jenvman.2022.117104

Downloads

Published

2026-02-10

How to Cite

Extraction of microplastics from aquatic environments using reversed-phase modified magnetic carbons. (2026). Sorbtsionnye I Khromatograficheskie Protsessy, 25(6), 901-910. https://doi.org/10.17308/sorpchrom.2025.25/13574

Most read articles by the same author(s)