MODIFICATION OF THE SURFACE OF THERMOELECTRIC BRANCHES BASED ON A Bi2Te3-Bi2Se3 SOLID SOLUTION BY PULSE PHOTON TREATMENT METHOD

  • Evgenii К. Belonogov Dr. Sci. (Phys.-Math.), Full Professor, Voronezh State Technical University, Voronezh State University; ph.: +7(473)2467633, e-mail: ekbelonogov@mail.ru
  • Vladislav А. Dybov postgraduate student, Junior Researcher, Voronezh State Technical University; ph.: +7(473) 2467633, e-mail: dybovvlad@gmail.com
  • Aleksandr V. Kostyuchenko Cand. Sci. (Phys.-Math.), Head of Laboratory, Voronezh State Technical University; ph.: +7(473) 2467633, e-mail: av-kostuchenko@mail.ru
  • Sergei B. Kuschev Dr. Sci. (Phys.-Math.), Full Professor, Leading Researcher, Voronezh State Technical University; ph.: +7(473) 2467633, e-mail: kushev_sb@mail.ru
  • Vladimir N. Sanin Dr. Sci. (Phys.-Math.), Full Professor, Military Educational and Scientific Center of the Air Force «N.E. Zhukovsky and Y.A. Gagarin Air Force Academy»; ph.: +7(473) 2467633, e-mail: vsanin@ro.ru
  • Dmitrii V. Serikov Junior Researcher, Voronezh State Technical University; ph.: +7(473) 2467633, e-mail: dmitriy.tut@mail.ru
  • Sergei А. Soldatenko Cand. Sci. (Phys.-Math.), Associate Professor, Voronezh State Technical University; ph.: +7(473) 2467633, e-mail: cossack408@mail.ru
Keywords: thermoelectric generator, Bi2Te3-Bi2Se3, pulsed photon treatment, surface modification, mechanical properties

Abstract

Degradation of the contact of the semiconductor legs of a thermoelement based on bismuth telluride with a commutation contact is a problem that hinders the commercial production of thermoelectric generators. The solution to this problem is to modify the near-surface layers of semiconductor legs. The aim of the research is to establish the regularities of phase and morphological transformations occurring in the near-surface layer and to evaluate the mechanical properties of the modified surface of semiconductor thermoelectric legs based on a Bi2Te3-Bi2Se3 (n-type) solid solution under pulsed photon treatment.

Semiconductor legs based on the Bi2Te3-Bi2Se3 solid solution were obtained by isostatic pressing of powders of the appropriate composition in an argon atmosphere at a temperature of about 360-380 °C. Pulsed photon treatment (PPT) of semiconductor legs was carried out by the emission of three gas-discharge xenon lamps in vacuum (10-3 Pa) and in an Ar atmosphere. The processing time was 06 - 2.2 s, while the energy density of the light flux arriving at the surface of the samples varied from 70 to 275 J/cm2. The phase composition was studied by X-ray diffractometry, the elemental composition was investigated by the method of local X-ray spectral microanalysis, and scanning electron microscopy and atomic force microscopy were used to study the surface morphology. The hardness of the samples was investigated by the method of measuring nanoindentation.

It has been established that PPT in vacuum leads to the development of the surface relief (an increase in the surface roughness and height difference) and a change in the phase composition due to the sublimation of selenium and tellurium. On the contrary, the PPT in the Ar atmosphere reduces the roughness and scarcely changes the phase composition of the legs. The research has determined the optimal modes of surface modification that allow to achieve the least roughness and high surface hardness without changing the phase composition of semiconductor thermoelectric legs by the PPT method.

ACKNOWLEDGEMENTS

The reported study was supported by the Ministry of Education and Science of the Russian Federation in the framework of the order of the Russian Government No.218 dated 9 April, 2010. (Contract No. 03.G25.31.0246).

Downloads

Download data is not yet available.

References

1. Brostow W. J. Mater. Res., 2012, vol. 27, no. 22. pp. 2931-2936. DOI: 10.1557/jmr.2012.335
2. Simkin A. V., Biryukov A. V., Repnikov N. I., Ivanov O. N. Journal of Thermoelectricity, 2012, no. 2, pp. 70-75.
3. Feng H.-P., Yu B., Chen Sh., Collins K., He C., Ren Z. F., Chen G. Electrochimica Acta, vol. 56, pp. 3079–3084. DOI:10.1016/j.electacta.2010.12.008
4. Biryukov A. V., Repnikov N. I., Ivanov O. N., Simkin A. V. Journal of Thermoelectricity, 2011, no. 3, pp. 35-40.
5. Virt I. S., Shkumbatyuk T. P., Kurilo I. V., Rudyi I. O., Lopatinskyi T. Ye., Linnik L. F., Tetyorkin V. V., Phedorov A. G. Semiconductors, 2010, vol. 44, no. 4, pp. 544–549. DOI: 10.1134/S1063782610040238
6. Ievlev V. M. Usp. Khim., 2013, vol. 82, no. 9, pp. 815–834.
7. Ievlev V. M., Kuschev S. B., Serbin O. V., et al. Vestnik VGTU. Ser. Materialovedenie, 2001, no. 1.10, pp.77-79. (in Russian)
8. Dvurechenskiy, A. V., Kachurin, G. A., Nidaev E. V. Pulse Annealing of Semiconductor Materials. Moscow, Science Publ., 1982, 208 p. (in Russian)
9. Borisenko V. E. Solid-Phase Processes in Semiconductors at Pulsed Heating. Minsk, Science and technology Publ., 1992, 248 p. (in Russian)
10. Powder Diffraction File, Alphabetical Index Inorganic Compounds. 1977, JCPDS, Pensilvania 19081, U.S.A.
11. Binary Alloy Phase Diagrams / Ed. Massalski T. B., Materials Park, Ohio: ASM International, 1990.
12. Lamuta C., Cupolillo A., Politano A., Aliev Z. S., Babanly M. B., Chulkov E. V., Alfano M., Pagnotta L. Phys. Status Solidi B-Basic Solid State Phys., 2016, vol. 253, no. 6, pp. 1082–1086. DOI: 10.1002/pssb.201552760
Published
2017-12-27
How to Cite
BelonogovE. К., DybovV. А., Kostyuchenko, A. V., Kuschev, S. B., Sanin, V. N., Serikov, D. V., & SoldatenkoS. А. (2017). MODIFICATION OF THE SURFACE OF THERMOELECTRIC BRANCHES BASED ON A Bi2Te3-Bi2Se3 SOLID SOLUTION BY PULSE PHOTON TREATMENT METHOD. Kondensirovannye Sredy I Mezhfaznye Granitsy = Condensed Matter and Interphases, 19(4), 479-488. https://doi.org/10.17308/kcmf.2017.19/226
Section
Статьи