THE INFLUENCE OF POLYSILOXANE DICABOXYLIC ACID ON STYRENE BUTADIENE LATEX PROPERTIES

  • Dmitriy V. Bykovskiy post-graduate student of Macromolecules Compounds and Colloid Chemistry Department, Voronezh State University, Voronezh, Russia; tel.: +7(951) 8713126, e-mail: nasredinne@mail.ru
  • Alexandr V. Samotin master student of the first year education of Macromolecules Compounds and Colloid Chemistry Department, Voronezh State University, Voronezh, Russia
  • Maria S. Lavlinskaya Cand. Sci. (Chem.), Junior Researcher of Molecular Biotechnology Department, Voronezh State University, Voronezh, Russia; tel.: +7(950) 7585216; e-mail: maria.lavlinskaya@gmail.com
  • Vyacheslav A. Kuznetsov Dr. Sci. (Chem.), Professor of Macromolecules Compounds and Colloid Chemistry Department, Voronezh State University, Voronezh, Russia; tel.: +7(920) 4523733; e-mail: dr.v.kuznetsov@gmail.com
  • Lyudmila A. Korystina Cand. Sci. (Chem.), Senior Researcher of JSC «Voronezhsintezkauchuk», Voronezh, Russia
  • Andrey V. Sorokin master student of the second year education of Macromolecules Compounds and Colloid Chemistry Department, Voronezh State University, Voronezh, Russia
Keywords: polysiloxane dicarboxylic acid, styrene-butadiene latex, latex films.

Abstract

The aim of this work is researching of influence of polysiloxane dicarboxylic acid (PSDA) on properties of styrene butadiene latex (SBL) and films based on it. PSDA is industry manufactured organic silicone water insoluble surfactant able to form stable oil-in-water emulsion in a presence of 0.1 weight parts. Synthesis of SBLs with different ratio of the emulsifiers Disponil FES 32 and PSDA was carried out by free radical emulsion polymerization with potassium persulfate initiator. Solid contents of SBLs is slightly depended of the emulsifier content mixture. Surface tension of modified SBLs is negligible higher in comparison to classical SBL. It was found via dynamic light scattering that size of the latex particles is decreased in a presence of 3.0 weight parts of Disponil FES 32 and 0.5-1.0 weight parts of PSDA, and growth of the latter content leads to particle size increasing. Mechanical stability evaluated as coagulum formation, and foam formation ability of SBLs also improved in a presence of 0.5-1.0 weight parts of PSDA. Latex films obtained from the modified by PSDA SBLs possess better mechanical properties. It should be noted that water sorption properties of modified latex films (Fig.1) are dramatically declined for SBLs prepared with PSDA use due to high hydrophobicity of organic silicone compounds. To sum up, presence of 0.5-1.0 weight parts of PSDA in initial polymerization emulsion leads to improving of some  properties of SBL and films based on it such as mechanical stability, foam formation ability of latexes and water sorption ability of modified SBL films.

Downloads

Download data is not yet available.

References

1. Grickova I. A., Prokopov N. I., Tsarkova M. S., et al. Noveishie dostizheniya v oblasti geterofaznoy polymerizatsii: uchebnoe posobie pod red. prof. Kedik S. A. [The Newest Achievements in a Range of Emulsion Polymerization]. Moscow, ZAO IFT Publ., 2018, 352 p. (in Russ.)
2. Bakhtina A. V. Diss…cand. chem. sci., Moscow, 2018, 106 p. (in Russ.)
3. Verezhnikov V. N., Grinfeld E. A. Sintez lateksov: uchebnoe posobie [Synthesis of Latexes]. Voronezh,VNIISK Publ., 2005, 47 p. (in Russ.)
4. Eliseeva V. I., Ivanchev S. S., Kuchanov S. I., et al. Emulsionnaya polimerizatsiya I ee primenenie v promyshlennosti [Emulsion Polymerization and it Application in Industry]. Moscow, Khimiya Publ., 1976, 243 p. (in Russ.)
5. Gritskova I. A., Zhachenkov S. V., Tsar’kova M. S., et al. Polym. Sci. Ser. B, 2011, vol. 53, no. 11-12, pp. 568–577. DOI: 10.1134/S1560090411110029
6. Gritskova I. A., Shragin D. I., Levachev S. M., et al. Fine Chemical Technologies, 2016, vol. 11, no. 2, pp. 5-16. (in Russ.)
Published
2018-09-11
How to Cite
Bykovskiy, D. V., Samotin, A. V., Lavlinskaya, M. S., Kuznetsov, V. A., Korystina, L. A., & Sorokin, A. V. (2018). THE INFLUENCE OF POLYSILOXANE DICABOXYLIC ACID ON STYRENE BUTADIENE LATEX PROPERTIES. Kondensirovannye Sredy I Mezhfaznye Granitsy = Condensed Matter and Interphases, 20(3), 378-383. https://doi.org/10.17308/kcmf.2018.20/574
Section
Статьи