PECULIARITIES OF STRUCTURING FOR MASS CRYSTALLIZATION OF Al AND Pb MELTS IN CONDITIONS OF HIGH-INTENSITY PLASTIC DEFORMATION AT CENTRIFUGING

  • Ju. I. Tarasov Dr. Sci. (Econ.), the President of the company LLC "SVETOZAR"; tel.: +7(916) 4950698, e-mail: y.tarasov@list.ru
  • V. V. Krjachko Cand. Sci. (Geol. and Mineral.), Leading Researcher of the company LLC "SVETOZAR"; tel.:+7 (980) 5477531, e-mail: platdep@mail.ru
  • V. I. Novikov Cand. Sci. (Eng.), Technical Director of LLC "SVETOZAR"; tel.: +7(915) 0619836, e-mail: novikov-nanotech@yan
Keywords: intensive plastic deformation, dynamic recrystallization, nonequilibrium vacancies, vacancy cluster tubes, solid phase recrystallization.

Abstract

Presents experimental results of Al and Pb metals crystallization carried out under high-intensity plastic deformation (HIPD) [e¢ = (102-104) sec-1] reaching the level of so called "solid-liquid" state in the new type of centrifugal casting device at rotor speeds of up to 2000 rpm. Using the method of atomic force microscopy (AFM), vacancy cluster tubes (VCT) with average diameters of 39 nm for Al and 25 nm for Pb have been detected in the crystallized volume of Al and Pb metals. Physical model of the formation of a new substructure within the metals in the form of vacancy cluster tubes, received in the process of high-intensive plastic deformation (HIPD) during the process of mass crystallization of Al and Pb melts, and, also the changes in the mechanical, magnetic and superconducting  properties of the above metals, which followed this process.

When crystallizing Al and Pb under high-intensive plastic deformation (HIPD) of e¢ = (102-104) per second type, in high-speed centrifugal casting devices, specially selected modes of metal crystallization are being chosen and special conditions are being created to achieve the dimensional effect of dynamic (shift) re-crystallization [1]. Shift deformation during centrifugal crystallization is caused primarily by a large incline of the temperature field from the periphery (relative to the cold wall of the rotor) to the molten central part of the rotor. The difference in the angular movement velocities of the already-frozen part of the metal (adjacent to the outer surface of the rotor wall) and the central part, where the metal still remains in the molten state, leads to a high-intensity deformation [e¢ = (102-104) per sec-1] of the crystallized metal melt solidified phase. Since the grain sizes at the crystallized phase initially comprise around tens of nano-meters (approximately crystal nucleation size), it becomes possible to achieve the dimensional effect of the dynamic re-crystallization [1] of a "nanocrystalline" solidified metal at high shift of strain velocities. The “non-equilibrium vacancies” formed this way condense into vacancy clusters, which are formed in the centrifugal force field in the form of vacancy-shaped cluster tubes stretched out to the center of rotation of the rotor.

The process undergoes conditions that are considerably different from the “equilibrium” conditions as compared to the ordinary metal crystallization from the melt. Such processes can lead to the formation of highly ordered non-equilibrium states characteristic of non-equilibrium open systems.

Downloads

Download data is not yet available.

References

1. Gorelik S. S. Rekristallizacija metallov i splavov [Recrystallization of Metals and Alloys]. Moscow, Metallurgija Publ., 1978, p. 486. (in Russ.)
2. Lapovok V. N., Novikov V. I., Svirida S. V. Fizika tverdogo tela, 1983, vol. 25, no. 6, pp. 1846-1848. (in Russ.)
3. Novikov V. I., Trusov L. I., Lapovok V. N., Gelejshvili T. P. Poroshkovaja metallurgija [Powder metallurgy], 1984, no. 5, pp. 28-34. (in Russ.)
4. Novikov V. I., Ganelin V. Ja., Trusov L. I., Fizika tverdogo tela, 1986, vol. 28, no. 4, pp. 1251-1254. (in Russ.)
5. Gorelik S. S., Blanter M. S. Izv. AN SSSR. Metally [Metals], 1982, no. 2, pp. 90-93. (in Russ.)
6. Novikov V. I., Ganelin V. Ja., Trusov L. I. Metallofizika [Metal Physics], 1986, vol. 8, no. 2, pp. 111-113. (in Russ.)
7. Geguzin Ja. E., Parickaja L. N., Bogdanov V. V., Novikov V. I. Fizika Metallov i Metallovedenie [Physics of Metals and Metallography], 1983, vol. 55, no. 4, pp. 768-773. (in Russ.)
8. Friedel J. Dislocations. Oxford, Pergamon Press, 1964, 587 p.
9. Physical Metallurgy. / Ed. by R.W. Cahn, P. Haasen, Amsterdam, New York, North-Holland Physics Pub., 1996, 2888 р.
10. Gleiter H., Chalmers B. High-angle Grain Boundaries. Oxford, Pergamon Press, 1972. 303 p.
11. Kosevich V. M., Ievlev V. M., Palatnik L. S., Fedorenko A. I. Struktura mezhkristallignyh i mezhfaznyh granic [Structure of Intercrystalline and Interphase Boundaries], Moscow, Metallurgija Publ., 1980, p. 256. (in Russ.)
12. Novikov. V. I., Grjaznov V. G., Trusov L. I. Fizika, himija, mehanika [Physics, Chemistry, Mechanics], 1986, no. 1, pp. 134-139. (in Russ.)
13. Novikov V. I., Lapovok V. N., Svirida S. V. Fizika Metallov i Metallovedenie [Physics of Metals and Metallography], 1984, vol. 57, no. 4, pp. 718-721. (in Russ.)
14. Trusov L. I., Novikov V. I., Gryaznov V. G. Svojstva i primenenie dispersnyh poroshkov [Properties and Application of Dispersed Powders], Kiev, Naukova Dumka Publ., 1986, pp. 98-114. (in Russ.)
15. Novikov V. I., Trusov L. I., Grjaznov V. G. Rost kristallov [Growth of Crystals], Moscow, Nauka Publ., 1988, vol. 17, pp. 69-86. (in Russ.)
16. Novikov V. I., Svirida S. V., Trusov L. I. Metallofizika [Metal Physics], 1984, vol. 6, no. 3, pp. 114-115. (in Russ.)
17. Utyashev F. Z. Fizika i tehnika vysokih davlenij [High-pressure Physics and Technology], 2010, vol. 20, no. 1, pp. 7-25. (in Russ.)
18. Bridgman P. W. Studies in Large Plastic Flow and Fracture. McGraw Hill, 1952, 362 p.
19. Trusov L. I., Novikov V. I., Repin I. A., Kazilin E. E., Ganelin V. Ja. Metallofizika [Metal Physics], 1988, vol. 10, no.1, pp. 104-107. (in Russ.)
20. Trusov L. I., Khvostantseva T. P., Solov’ev V. A., Mel’nikova V. A. Journal of Materials Science, 1995, vol. 30, no. 11, pp. 2956-2961. DOI: https://doi.org/10.1007/BF00349669
21. Trusov L. I., Khvostantseva T. P., Solov’ev V. A., Mel’nikova V. A. Nanostructured Materials, 1994, vol. 4, no. 7, pp. 803-813. DOI: https://doi.org/10.1016/0965-9773(94)90086-8
Published
2018-03-19
How to Cite
Tarasov, J. I., Krjachko, V. V., & Novikov, V. I. (2018). PECULIARITIES OF STRUCTURING FOR MASS CRYSTALLIZATION OF Al AND Pb MELTS IN CONDITIONS OF HIGH-INTENSITY PLASTIC DEFORMATION AT CENTRIFUGING. Kondensirovannye Sredy I Mezhfaznye Granitsy = Condensed Matter and Interphases, 20(1), 125-134. https://doi.org/10.17308/kcmf.2018.20/484
Section
Статьи