Engineering of biomimetic composite dental materials based on nanocrystalline hydroxyapatite and light-curing adhesive

Keywords: Biomimetic strategies, Nanodentology, Calcium hydroxyapatite, Adhesives

Abstract

    With the use of light-curing Bis-GMA (Bis-phenol-А glycidylmethacrylate) adhesive and nanocrystalline carbonatesubstituted calcium hydroxyapatite (nano-сHAp), corresponding by an aggregate set of characteristics to the apatite of human enamel and dentin obtained from the biogenic source of calcium – egg’s shell of birds biomimetic Bis-GMA/nano-сHAp adhesives were synthesized.
     Introduction and distribution of nano-cHAp filler in the adhesive matrix as well as its interaction with molecular groups of the latter one resulted in the change of chemical bonds that was evidenced by the data of Fourier transform infrared (FTIR) spectroscopy. In summary, for the specified nanofiller concentration increased values of Vicker hardnesses (VH) and degree of conversion were attained simultaneously while light curing of Bis-GMA/nano-cHAp adhesive.
     This result would provide a considerable influence on the following application of the developed biomimetic adhesives and clinical successes of teeth restoration with the use of these composites

Downloads

Download data is not yet available.

Author Biographies

Pavel V. Seredin, Voronezh State University, 1 Universitetskaya pl., Voronezh 394018, Russian Federation

Dr. Sci. (Phys.–Math.), Full
Professor, Chair of Department, Department of Solid
State Physics and Nanostructures, Voronezh State
University (Voronezh, Russian Federation).

Dmitry L. Goloshchapov, Voronezh State University, 1 Universitetskaya pl., Voronezh 394018, Russian Federation

Cand. Sci. (Phys.–Math.),
Assistant Professor, Department of Solid State Physics
and Nanostructures, Voronezh State University
(Voronezh, Russian Federation).

Asaad. A. H. AlZubaidi, Medical Instruments Techniques Engineering Department, Technical College of Engineering, Al-Bayan University, Baghdad, Iraq

PhD, Lecturer, Medical
Instruments techniques Engineering Department,
Technical College of Engineering, Al-Bayan University
(Baghdad, Iraq)

Vladimir M. Kashkarov, Voronezh State University, 1 Universitetskaya pl., Voronezh 394018, Russian Federation

Cand. Sci. (Phys.–Math.),
Senior Researcher, Department of Solid State Physic
and Nanostructures, Voronezh State University
(Voronezh, Russian Federation).

Nikita S. Buylov, Voronezh State University, 1 Universitetskaya pl., Voronezh 394018, Russian Federation

Cand. Sci. (Phys.–Math.), Educator,
Department of Solid State Physics and Nanostructures,
Voronezh State University (Voronezh, Russian
Federation).

Yury A. Ippolitov, Department of Pediatric Dentistry with Orthodontia, Voronezh State Medical University, 11 Studentcheskaya str., Voronezh 394006, Russian Federation

Dr. Sci. (Med.), Full Professor,
Head of Dentistry Institute of Postgraduate Medical
Education Department, Voronezh State Medical
University (Voronezh, Russian Federation).

Jitraporn (Pimm) Vongsvivut, ANSTO-Australian Synchrotron, 800 Blackburn Road, Clayton, Victoria 3168, Australia

Beamline Scientist,
IR Microspectroscopy, Australian Synchrotron,
Synchrotron Light Source Australia Pty LTD (Melburn,
Australia).

References

Zafar M. S., Amin F., Fareed M. A., Ghabbani H., Riaz S., Khurshid Z., Kumar N. Biomimetic aspects of restorative entistry biomaterials. Biomimetics. 2020; 5(3): 34. https://doi.org/10.3390/biomimetics5030034

Alhenaki A. M., Attar E. A., Alshahrani A., Farooq I., Vohra F., Abduljabbar T. Dentin bond integrity of filled and unfilled resin adhesive enhanced with silica nanoparticles – an SEM, EDX, Micro-Raman, FTIR and micro-tensile bond strength study. Polymers. 2021; 13(7): 1093. https://doi.org/10.3390/polym13071093

Timpe N., Fullriede H., Borchers L., Stiesch M., Behrens P., Menzel H. Nanoporous silica nanoparticles with spherical and anisotropic shape as fillers in dental composite materials. BioNanoMaterials. 2014;15(3–4): https://doi.org/10.1515/bnm-2014-0010

Seredin P. V., Goloshchapov D. L., Prutskij T., Ippolitov Yu. A. Fabrication and characterisation of composites materials similar optically and in composition to native dental tissues. Results in Physics. 2017;7: 1086–1094. https://doi.org/10.1016/j.rinp.2017.02.025

Goloshchapov D. L. , Gushchin M. S. , Kashkarov V. M., Seredin P. V., Ippolitov Y. A., Khmelevsky N. O., Aksenenko A. Yu. XPS and XANES studies of biomimetic composites based on B-type nano-hydroxyapatite. Results in Physics. 2018;9: 1386–1387. https://doi.org/10.1016/j.rinp.2018.04.065

Goloshchapov D., Buylov N., Emelyanova A., Ippolitov I., Ippolitov Y., Kashkarov V., Khudyakov Y., Nikitkov K., Seredin P. Raman and XANES spectroscopic study of the influence of coordination atomic and molecular environments in biomimetic composite materials integrated with dental tissue. Nanomaterials. 2021;11(11): 3099. https://doi.org/10.3390/nano11113099

Provenzi C., Leitune V. C., Colares F. M., Trommer R., Bergmann C. P., Samuel S. M. Interface evaluation of experimental dental adhesives with nanostructured hydroxyapatite incorporation. Applied Adhesion Science. 2014;2(1): 2. https://doi.org/10.1186/2196-4351-2-2

Lezaja M., Jokic B. M., Veljovic D. N., Miletic V. Shear bond strength to dentine of dental adhesives containing hydroxyapatite nano-fillers. Journal of Adhesion Science and Technology. 2016;30(24): 2678–2689. https://doi.org/10.1080/01694243.2016.1197086

Leitune V. C. B., Collares F. M., Trommer R. M., Andrioli D. G., Bergmann C. P., Samuel S. M. W. The addition of nanostructured hydroxyapatite to an experimental adhesive resin. Journal of Dentistry. 2013;41(4): 321–327. https://doi.org/10.1016/j.jdent.2013.01.001

Al-Hamdan R. S., Almutairi B., Kattan H. F., Alresayes S., Abduljabbar T., Vohra F. Assessment of hydroxyapatite nanospheres incorporated dentin Aadhesive. A SEM/EDX, micro-Raman, microtensile and micro-indentation study. Coatings. 2020;10(12): 1181. https://doi.org/10.3390/coatings10121181

Daood U., Swee Heng C., Neo Chiew Lian J., Fawzy A. S. In vitro analysis of riboflavin-modified, experimental, two-step etch-and-rinse dentin adhesive: Fourier transform infrared spectroscopy and micro-Raman studies. International Journal of Oral Science. 2015;7(2): 110–124. https://doi.org/10.1038/ijos.2014.49

Kasraei S., Khamverdi Z. Effect of nanofiller addition to an experimental dentin adhesive on microtensile bond strength to human dentin. Journal of Dentistry of Tehran University of Medical Sciences. 2009;6(2): 1–5.

del Pilar Gutiérrez-Salazar M., Reyes-Gasga J. Microhardness and chemical composition of human tooth. Materials Research. 2003;6(3): 367–373. https://doi.org/10.1590/S1516-14392003000300011

Aydın B., Pamir T., Baltaci A., Orman M. N., Turk T. Effect of storage solutions on microhardness of crown enamel and dentin. European Journal of Dentistry. 2015;09(02): 262–266. https://doi.org/10.4103/1305-7456.156848

Souza G. M. D. Nanoparticles in restorative materials. In: Nanotechnology in Endodontics. Kishen A. (ed.). Springer International Publishing; 2015. pp. 139–171. http://link.springer.com/cГАПter/10.1007/978-3-319-13575-5_8

Published
2022-08-26
How to Cite
Seredin, P. V., Goloshchapov, D. L., AlZubaidi, A. A. H., Kashkarov, V. M., Buylov, N. S., Ippolitov, Y. A., & Vongsvivut, J. (Pimm). (2022). Engineering of biomimetic composite dental materials based on nanocrystalline hydroxyapatite and light-curing adhesive. Kondensirovannye Sredy I Mezhfaznye Granitsy = Condensed Matter and Interphases, 24(3), 356-361. https://doi.org/10.17308/kcmf.2022.24/9858
Section
Original articles

Most read articles by the same author(s)